Lets cosplay! Fate Testarossa

Mein Gott! Is Ellie resurrecting this page from the dead?

Well...I had never forgotten about my own little corner of the tinterwebs. In fact, if you have read my more recent posts I can still confirm that I have been pretty busy lately. With me working many hours these days and spending much of my free time with my boyfriend naturally the time for cosplaying has been a little cut, both productively and blogger-wise. I still do my best to update my Facebook Page but even then I still wish I have more time into these things.

Without further ado, I am still yet to write about my Fate cosplay.

When I was still in school, I have came across an anime called Nanoha Strikers. It was back before I knew the Nanoha franchise also covered days when Nanoha and Fate were younger. As much as I loved the series it wasn't until last year I have watched the earlier seasons and felt there was a little void in my life that was finally filled.

I had some black and white fabric that was lying around, as well as some red PVC so I had decided to give Fate a try. I made a basic black leotard with a zipper in the back that happens to have been where the red straps were sewn into. The bows, leggings and gloves were made of black Spandex and the skirt had a nice Cotton twill feel to it. It was only a bit of scrap material so it was shorter than I would have liked but made it work with some gathering. The front part is attached to some elastic to make it easy to slip off when taking the costume off.

Day 1 of work

The cape is what makes this usually cold cosplay more cosy and this revealing one much less intimidating to wear. It has a nice sheen to it and it is lined with some lovely Maroon coloured Polyester fabric with interfacing inside the collar.

The belt buckles and yellow triangles were some left over Worbla that was painted silver. Perhaps surprisingly the most stressful part of the cosplay was waiting for the wig as I have never been blond before. When it arrived it was a very pleasant surprise and have plans to cosplay some other of our yellow-haired friends now I have the confidence to pull of that colour!

Fate is far from my more comfortable costumes as the red straps are very constrictive and I normally have to unzip the back a little so I can breathe. She is also among the very few where I get to wear heels. Placing the extensions to the wig can be a challenge within itself but the cape makes this costume somewhat nice to wear.

Fate was worn at J-con 2015, Namsoc Halloween night 2015, LAGC Winter 2016 and Alcon 2016. I wish to wear this as I am usually ill or tired when I am in this for some reason. In fact, on the day of Fate's debut I was up until 4am, had 2 hours before the con to sleep and had to rush home for an evening shift at work. Never again!

Lets cosplay! Sora Naegino

So Kitacon has come and gone Here is my newest cosplay! I love how she turned out and was a massive learning curve.

 I used my Rock Lee costume as a rough guide for the bodysuit. Once I got it all shaped I used fabric paint to paint on the details.

I added some bling by hand gluing rhinestones onto everything that has been painted. I am yet to have a proper estimation of how many there are but as a guess I think there may be well over 3000! Duchess satin and skin toned spandex were used for the finishing touches.The same were used for the sleeves.

The wings are a metal mesh base, cut to shape using strong scissors and gaffer taped on the edges for safety (they edges are really sharp!). Cardboard is used on the edged for sturdyness! Over 1000 white feathers are hand glued individually. The details were blue EVA foam cut and spraypainted gold. Polystyrene balls were painted red for the orbs. Thick elastic was used for the harness but if I have more time I would have considered using the PVC piping method.

The gold wristlets were made of Worbla thermoformed around craft foam for additional thickness. The crowd was a simple headband with a strip of feathers glued on. Shoes are on sale from Primark and I already owned the wig.

For more in-deph details of how this is made and more photos check out my page on CosplayIsland:
http://www.cosplayisland.co.uk/costume/view/96705

Lets cosplay! Lady Subaru

Thanks Pouncy for the pic :D

Is everyone having fun at AmeChibi? Sadly it will be finishing for the year at the end of today but it has already been announced Amecon would be returning next year on the 29-31 July at the Warwick Arts Centre! Is everyone excited!

Today we will be going back in time a little bit and discuss one of my slightly earlier creations. Although it is defiantly far from one of my favorites it was still one of my greatest learning curves and has taught me alot of what I know about costume making today!

The base of the costume was made from Duchess Satin. Personally I am not a fan of dress satin as it is cheap and creases easily where Duchess Satin has this lovely sheen that doesnt show off every wrinkle. The top took like 4 attenpts before I got it right. In the end I have used an old T-shirt to draw on a rough patten and made a mock up. Thankfully the fabric was super cheap (£2 per metre hell yeah!!!).

The collar and apron were also made of Duchess Satin. The details on the apron were painted using Dylon fabric paint and were painted free hand. I have used hemming tape for the bias tape.

The pendant was sculpted by hand using fimo clay. I began by making the wings for it and done the feathers by hand. I made the body separate and glued them together before painting them in red and gold. The brooches were also fimo clay. The wings on the back were a pair of costume shop wings that were plucked off and reshaped using the same base. I have used wood glue to attach them and they finished so beautifully,

The shoulder poofs were hexagon-shaped bits of fabric that were shaped into pouches and have lots of tulle to poof them out. They both have elastic attached to them right across my back to slip the wings through, functioning as a harness for them as well as parts of the costume.

The boots and wig were ebayed.

Events worn to: Kitacon 2011

Lets cosplay! Rock Lee

HAPPY EASTER!!!!!

I hope everyone is having a great day with movies and chocolate! Today I have decided to give my beloved sewing machine a break and enjoy my day day in front of the TV and take it easy.

I have decided that it is time to start putting my work up more often. What better way to start than to show off my most recent work?

'Lets cosplay!' is pretty much an idea derived from the 'Lets plays' that has stormed Youtube but instead of gaming I will give you a run through of my favorite costumes every once in a while.

I have attended Em-Con a few weeks ago in my hometown. Em-con is a annual convention in Nottingham that focuses of Sci-fi and fantasy as opposed to anime. There you can meet various actors from popular series such as Red Dwarf and Game of Thrones. There were also many dealers and artists around. It was a fantastic family event, with tiny Cybermen and little Jedis.

I was expecting it to be a crowded event so I opted for a costume of a character that is well loved, easy to wear and practical to move in when I need to retreat to a quieter place. Rock Lee was planned for Kitacon 2015 but because I was making fast progress with him I thought I'd budge him up ahead.

The weekend was a cold one and it was a chilled out event so we didnt have time to do a 'serious' photoshoot so much of the photos taken were us just messing about.

Several years ago I have brought the legwarmers on Ebay. I didn't have any plans to make the costume at the time but being a Rock Lee fan I had brought them for myself for a little joke and a nod to one of my favorite characters. I became more confident with wearing shorter wigs some time later so there we go!

The bodysuit was just a roll of blue Spandex that I was given for free a year ago. I have decided to make use of it by throwing it in 2 dye baths to achieve the colour. The first bath was by using Jacquards iDye (recommended by my good friend FishyFins) in green and another bath using Dark green Dylon dye. Jacquard's was by far effective but the Dylon gave it a slightly 'greener' hue. I have used my (Knight of Zero) Suzaku costume to help pattern the costume out and a simple green zipper rolls down the back. The collar has been replaced since being worn to Em-con.

The Chunin jacket was by far the most difficult part of the costume. I have adapted the beginning of it from a fleece jacket pattern my friend Katie have copied for me a few years back from Hinata. Though technically relatively simple, measurements were of prime importance getting the proportions right. The fabric was dyed white cotton using Dark Green Dylon fabric paint (same time as the bath for the bodysuit) and wadding was placed around the shoulders, collar and bottom hem. The red spiral was some leftover red PVC from Hikaru and appliqued onto the back.

The wig and forhead protector were also Ebayed. The wig had a ponytail that was cut off and tidied. The forehead protector plate was salvaged from a very cheap one and put onto a strip on polycotton. The eyebrows were coated with eyeliner.

Revisions are underway. I plan to make some new shoes for Kitacon!